
![]() Purchasing An Air Conditioner
Window units are great if you only have one or a few small rooms to cool. They require no special ducting or wiring. When you shop, be sure to look for EnergyGuide labels and compare energy costs for comparable units, and look for units displaying the EnergyStar logo indicating they are more energy efficient and environmentally friendly. Once you've selected one, install it into the window, and plug it in to the standard house electrical outlet. Whole-house units are more complicated and usually purchased through a contractor who will look at the size of your house, the climate, and your cooling loads to determine what size unit to specify. They may be a problem if your home does not have ductwork to carry the cooled air throughout your home. Adding them can be an expensive retrofit. In working with a contractor to select a whole-house system, you'll need to emphasize your interest in a high-efficiency unit as indicated by a SEER (seasonal energy efficiency ratio) of 12 or higher. Systems are called split-systems when they consist of an outside part housing the compressor and coils, and an indoor unit containing the cooling coils and air handler. Your first concern in locating the outdoor unit may be to avoid hearing the noise it makes, but in addition, try to locate it in a shady spot on the north side of the home to keep it cooler. It works more efficiently exchanging its heat when in a cooler place. Evaporative coolers that work by blowing air over a moist pad only work well in hot, arid climates. Where they will work, they do save money. They cost about half what a conventional air conditioner does and less than a quarter as much to operate. Heat pumps are convenient because they provide both heating and cooling in a single unit. In the summer, they work like an air conditioner. In the winter, they reverse to become air heaters, moving heat from outside the home to the inside. Naturally, they are more expensive than a simple air conditioner, but they make sense when you need both heating and cooling and the climate is not too severe. That's because heat pumps work best in the heating mode when the outside temperature is above 30° F.
Top of RES | Index | FAQs
|